HP VPN Firewall Appliances High Availability Command Reference

146

bfd min-receive-interval

Use bfd min-receive-interval to configure the minimum interval for receiving BFD control packets.

Use undo bfd min-receive-interval to restore the default minimum interval for receiving BFD control

packets.

Syntax

bfd min-receive-interval value

undo bfd min-receive-interval

Views

Interface view

Default command level

2: System level

Parameters

value: Minimum interval for receiving BFD control packets, in milliseconds. The value must be a multiple

of 10.

Usage guidelines

If the remote device sends BFD control packets at an interval shorter than the minimum receiving interval

of the local device, the remote device changes its sending interval to the minimum receiving interval of

the local device.

Examples

# Configure the minimum interval for receiving BFD control packets on GigabitEthernet 1/1 as 500

milliseconds.

<Sysname> system-view

[Sysname] interface GigabitEthernet 1/1

[Sysname-GigabitEthernet1/1] bfd min-receive-interval 500

bfd min-transmit-interval

Use bfd min-transmit-interval to configure the minimum interval for transmitting BFD control packets.

Use undo bfd min-transmit-interval to restore the default minimum interval for transmitting BFD control