HP VPN Firewall Appliances High Availability Command Reference

151
Examples
# Display detailed BFD session information on the device.
<Sysname> display bfd session verbose
Total session number: 1 Up session number: 1 Init mode: Active
IPv4 session working under Ctrl mode:
Local Discr: 1 Remote Discr: 1
Source IP: 111.1.1.1 Destination IP: 111.1.1.2
Session State: Up Interface: Ethernet1/1
Min Trans Inter: 400ms Act Trans Inter: 400ms
Min Recv Inter: 400ms Act Detect Inter: 2000ms
Recv Pkt Num: 18 Send Pkt Num: 18
Hold Time: 1900ms Connect Type: Direct
Running Up for: 00:56:25 Auth mode: None
Protocol: OSPF
Diag Info: No Diagnostic
Table 38 Command output
Field Descri
p
tion
Total session number Total number of BFD sessions.
Up session number Total number of active BFD sessions.
Init mode BFD operating mode: active or passive.
session working under xx mode
IPv4/IPv6 BFD session mode:
• Ctrl—Control packet mode.
• Echo—Echo packet mode.
Local Discr Local ID of the session.
Remote Discr Remote ID of the session.
Source IP Source IP address of the session.
Destination IP Destination IP address of the session.
Session State Session state.
Interface Name of the interface of the session.
Min Trans Inter Expected minimum transmit interval configured on the interface.
Min Recv Inter Expected minimum receive interval configured on the interface.
Act Trans Inter Actual transmit interval.
Act Detect Inter Actual session detection timer.
Recv Pkt Num Number of packets received.
Send Pkt Num Number of packets sent.
Hold Time Length of time before session detection timer expires.
Auth mode Session authentication mode: simple, MD5, or SHA-1.
Connect Type Connection type of the interface.