HP VPN Firewall Appliances High Availability Command Reference

24
Use undo vrrp ipv6 vrid priority to restore the default.
Syntax
vrrp ipv6 vrid virtual-router-id priority priority-value
undo vrrp ipv6 vrid virtual-router-id priority
Default
The priority of a router in a VRRP group is 100.
Views
Interface view
Default command level
2: System level
Parameters
virtual-router-id: VRRP group number, which ranges from 1 to 255.
priority-value: Priority value of the router in the specified VRRP group, which ranges from 1 to 254. A
higher number indicates a higher priority.
Usage guidelines
Before executing the command, create a VRRP group on an interface and configure the virtual IPv6
address of the VRRP group.
The role that a router plays in a VRRP group depends on its priority. A higher priority means that the
router is more likely to become the master. Priority 0 is reserved for special use and 255 for the IP address
owner.
If the router is the IP address owner, its priority is always 255. Therefore, it remains as the master as long
as it is functioning correctly.
Examples
# Set the priority of the router in VRRP group 1 to 150.
<Sysname> system-view
[Sysname] interface gigabitethernet0/1
[Sysname-GigabitEthernet0/1] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local
[Sysname-GigabitEthernet0/1] vrrp ipv6 vrid 1 priority 150
Related commands
display vrrp ipv6
vrrp ipv6 vrid timer advertise
Use vrrp ipv6 vrid timer advertise to configure the Adver_Timer of the specified VRRP group.
Use undo vrrp ipv6 vrid timer advertise to restore the default.
Syntax
vrrp ipv6 vrid virtual-router-id timer advertise adver-interval
undo vrrp ipv6 vrid virtual-router-id timer advertise
Default
The Adver_Timer is 100 centiseconds.