HP VPN Firewall Appliances High Availability Command Reference

26
track track-entry-number: Specifies a track entry. The track-entry-number argument ranges from 1 to
1024.
reduced priority-reduced: Reduces the priority of the router in the VRRP group by a specific value when
the state of the specified track entry changes to the negative state. The priority-reduced argument ranges
from 1 to 255.
switchover: Enables the router in backup state to take over as the master immediately after the specified
track entry changes to the negative state.
Usage guidelines
When the associated track entry changes to the negative state, the priority of the router in the VRRP group
decreases by a specified value, or the router immediately takes over as the master if it is a backup,
depending on your configuration.
If reduced priority-reduced and switchover are not specified, the priority of the router in the VRRP group
decreases by 10 when the track entry changes to negative.
When the track entry changes from negative to positive or invalid, the router automatically restores its
priority.
You must create the VRRP group and assign a virtual IP address to it before you can associate it with any
track entry.
The vrrp ipv6 vrid track command cannot take effect on an IP address owner. If you have configured the
command on an IP address owner, the configuration takes effect after the router changes to be a non IP
address owner.
You can create a track entry with the track command before or after you associate it with an IPv6 VRRP
group. For more information about configuring track entries, see High Availability Configuration Guide.
Examples
# Associate IPv6 VRRP group 1 on GigabitEthernet 0/1 with track entry 1 and decrease the priority of
the router in the VRRP group by 50 when the state of track entry 1 changes to negative.
<Sysname> system-view
[Sysname] interface gigabitethernet0/1
[Sysname-GigabitEthernet0/1] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local
[Sysname-GigabitEthernet0/1] vrrp ipv6 vrid 1 track 1 reduced 50
Related commands
• display vrrp ipv6
• vrrp ipv6 vrid track interface
vrrp ipv6 vrid track interface
Use vrrp ipv6 vrid track interface to configure to track the specified interface.
Use undo vrrp ipv6 vrid track interface to disable tracking the specified interface.
Syntax
vrrp ipv6 vrid virtual-router-id track interface interface-type interface-number [ reduced priority-reduced ]
undo vrrp ipv6 vrid virtual-router-id track [ interface interface-type interface-number ]
Default
No interface is being tracked.