HP VPN Firewall Appliances High Availability Command Reference

30
Default
Stateful failover is disabled.
Views
System view
Default command level
2: System level
Parameters
dissymmetric-path: Enables asymmetric-path mode stateful failover.
symmetric-path: Enables symmetric-path mode stateful failover.
Examples
# Enable symmetric-path mode stateful failover.
<Sysname> system-view
[Sysname] dhbk enable backup-type symmetric-path
dhbk ignore-version-check
Use dhbk ignore-version-check to disable checking version consistency between the two stateful failover
devices.
Use undo dhbk ignore-version-check to enable version consistency check.
Syntax
dhbk ignore-version-check
undo dhbk ignore-version-check
Default
Version consistency check is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
Execute the command on both stateful failover devices.
Examples
# Disable version consistency check.
<Sysname> system-view
[Sysname] dhbk ignore-version-check
dhbk interface vlan
Use dhbk interface vlan to configure a failover interface and a backup VLAN.
Use undo dhbk interface to remove the failover interface and backup VLAN.