HP VPN Firewall Appliances High Availability Command Reference

39
1 1 1 0 78
Table 13 Command output
Field Descri
p
tion
Peak
Peak rate in pps (average rate is computed every 10 seconds,
and the greatest average rate is taken as the peak rate).
10Sec Average rate (in pps) for the last 10 seconds.
1Min Average rate (in pps) for the last 1 minute.
5Min Average rate (in pps) for the last 5 minutes.
Total-Data
Total amount of data collected from the time when IPC
performance statistics was enabled to the time when this
command is executed.
Related commands
ipc performance enable
display ipc queue
Use display ipc queue to display output queue information for an IPC node.
Syntax
display ipc queue { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Specifies a node by its number, which can be 0 or 1.
self-node: Specifies the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display output queue information for the local node.
<Sysname> display ipc queue self-node
QueueType QueueID Dst-NodeID Length FullTimes Packet
------------------------------------------------------------
UNICAST 0 0 4096 0 0
UNICAST 1 0 4096 0 0