HP VPN Firewall Appliances High Availability Command Reference

56
Test t
yp
e Codec t
yp
e Default value (in b
y
tes)
Voice G.711 A-law 172
Voice G.711 μ-law 172
Voice G.729 A-law 32
Configure the size of the payload in each probe packet correctly. If the traffic amount is large in the
network, configure a smaller payload size to reduce network burden. If runt packets are required to be
transmitted in the network, configure a bigger payload size to avoid packet loss.
Examples
# Configure the size of the payload in each ICMP echo request as 80 bytes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80
description (any NQA operation view)
Use description to configure a description for an NQA operation, such as the operation type or purpose.
Use undo description to remove the description.
Syntax
description text
undo description
Default
No description is configured for an NQA operation.
Views
Any NQA operation view
Default command level
2: System level
Parameters
text: Specifies a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
destination ip
Use destination ip to configure the destination IP address for the operation.
Use undo destination ip to remove the destination IP address.