HP VPN Firewall Appliances High Availability Command Reference

2
Examples
# When VRRP operates in standard mode, display brief information about all VRRP groups on the device.
<Sysname> display vrrp
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface VRID State Run Adver Auth Virtual
Pri Timer Type IP
---------------------------------------------------------------------
GE0/1 1 Master 140 1 Simple 1.1.1.1
Table 1 Command output
Field Descri
p
tion
Run Mode Current VRRP working mode: standard mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the
VRRP group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of
the VRRP group is mapped to the virtual MAC address.
Total number of virtual routers Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group.
Run Pri
Current priority of the router. With VRRP tracking configured, the priority of
the router changes when the state of the monitored interface or track entry
changes.
Adver. Timer VRRP advertisement interval, in seconds.
Auth Type
Authentication type:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Virtual IP Virtual IP address of the VRRP group.
# When VRRP operates in standard mode, display detailed information about all VRRP groups on the
device.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 1
Admin Status : Up State : Master
Config Pri : 150 Running Pri : 140
Preempt Mode : Yes Delay Time : 5
Auth Type : Simple Key : ******