HP VPN Firewall Appliances High Availability Command Reference

81
Default command level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password used to log in to the FTP server. This argument is case sensitive. If
simple is specified, it must be a plaintext string of 1 to 32 characters. If cipher is specified, it must be a
ciphertext string of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext
password.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
Related commands
• username
• operation
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
UDP jitter operation view
Default command level
2: System level
Parameters
times: Specifies the probe times in the range of 1 to 15.
Usage guidelines
If an operation is to perform multiple probes, the system starts the next probe when it receives responses
to packets sent in the first probe, or when the probe timeout time expires.
This command is not available for the voice operation. The voice operation can perform only one probe.