HP VPN Firewall Appliances High Availability Command Reference

82
Examples
# Configure the ICMP echo operation to perform 10 probes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] probe count 10
probe packet-interval
Use probe packet-interval to configure the interval for sending packets in the probe.
Use undo probe packet-interval to restore the default.
Syntax
probe packet-interval packet-interval
undo probe packet-interval
Default
The interval is 20 milliseconds.
Views
UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
packet-interval: Specifies the interval for sending packets, in the range of 10 to 60000 milliseconds.
Examples
# Configure the UDP jitter operation to send packets at an interval of 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100
probe packet-number
Use probe packet-number to configure the number of packets to be sent in one UDP jitter or voice probe.
Use undo probe packet-number to restore the default.
Syntax
probe packet-number packet-number
undo probe packet-number
Default
An UDP jitter probe sends 10 packets and a voice probe sends 1000 packets.
Views
UDP jitter operation view, voice operation view