HP VPN Firewall Appliances High Availability Command Reference

83
Default command level
2: System level
Parameters
packet-number: Specifies the number of packets to be sent per probe. The value range for the UDP jitter
operation is 10 to 1000 and for the voice operation is 10 to 60000.
Examples
# Configure the UDP jitter probe to send 100 packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout
Use probe packet-timeout to configure the timeout time for waiting for a response in the UDP jitter or
voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
Default
The response timeout time in the UDP jitter operation is 3000 milliseconds, and the response timeout time
in the voice operation is 5000 milliseconds.
Views
UDP jitter, voice operation view
Default command level
2: System level
Parameters
packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter or
voice operation. The value range is 10 to 3600000.
Examples
# Configure the timeout time for waiting for a response in the UDP jitter operation as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Use probe timeout to specify the probe timeout time. If a probe does not complete within the period, the
probe is timed out.