HP VPN Firewall Appliances High Availability Command Reference

84
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view
Default command level
2: System level
Parameters
timeout: Specifies the probe timeout time in milliseconds. The value range for the FTP or HTTP operation
is 10 to 86400000 and for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, or UDP echo operation is
10 to 3600000.
Usage guidelines
This command is not available for the UDP jitter or voice operation.
Examples
# Configure the probe timeout time for the DHCP operation as 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
reaction checked-element icpif
Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in the
voice operation. You cannot edit a reaction entry. To change the attributes in a reaction entry, use undo
reaction to delete the entry first.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element icpif threshold-value upper-threshold lower-threshold
[ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring ICPIF values is configured.
Views
Voice operation view
Default command level
2: System level