HP VPN Firewall Appliances High Availability Configuration Guide

97
Figure 47 Assigning GigabitEthernet 0/1 and GigabitEthernet 0/2 to Collaboration Group 1
Verifying the configuration
1. Remove the cable connecting Device to GigabitEthernet 0/2 on Firewall A.
2. Select High Reliability > Collaboration Group from the navigation tree of Firewall A, and check the
status of Collaboration Group 1.
The page that appears shows that the status of Collaboration Group 1 is down.
Figure 48 Checking the status of Collaboration Group 1
3. Click the icon for Collaboration Group 1 and check the status of its member ports.
The page that appear shows that the status of GigabitEthernet 0/1 is down and that of
GigabitEthernet 0/2 is Linkgroup-down.