HP VPN Firewall Appliances High Availability Configuration Guide

106
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify the FTP type and enter
its view.
type ftp N/A
4. Specify the IP address of the
FTP server as the destination
address of FTP request
packets.
destination ip ip-address
By default, no destination IP
address is configured.
5. Configure the source IP
address of FTP request
packets.
source ip ip-address
By default, no source IP address is
specified.
The source IP address must be the
IP address of a local interface. The
local interface must be up.
Otherwise, no FTP requests can be
sent out.
6. Specify the operation type.
operation { get | put }
Optional.
By default, the operation type for
the FTP operation is get, which
means obtaining files from the FTP
server.
7. Configure a login username.
username name
Optional.
By default, no login username is
configured.
8. Configure a login password.
password [ cipher | simple ]
password
Optional.
By default, no login password is
configured.
9. Specify the name of a file to
be transferred.
filename file-name By default, no file is specified.
10. Set the data transmission
mode.
mode { active | passive }
Optional.
active by default.
Configuring an HTTP operation
An HTTP operation measures the time the NQA client uses to obtain data from an HTTP server.
The TCP port number of the HTTP server must be 80. Otherwise, the HTTP operation fails.
To configure an HTTP operation:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.