HP VPN Firewall Appliances High Availability Configuration Guide

110
Ste
p
Command Remarks
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify the TCP type and
enter its view.
type tcp N/A
4. Configure the destination
address of TCP packets.
destination ip ip-address
By default, no destination IP
address is configured.
The destination address must be
the same as the IP address of the
listening service configured on the
NQA server.
5. Configure the destination port
of TCP packets.
destination port port-number
By default, no destination port
number is configured.
The destination port number must
be the same as that of the listening
service on the NQA server.
6. Configure the source IP
address of TCP packets.
source ip ip-address
Optional.
By default, no source IP address is
specified.
The source IP address must be the
IP address of a local interface. The
local interface must be up.
Otherwise, no TCP packets can be
sent out.
Configuring a UDP echo operation
A UDP echo operation measures the round-trip time between the client and a specific UDP port on the
NQA server.
The UDP echo operation requires both the NQA server and the NQA client. Before you perform a UDP
echo operation, configure a UDP listening service on the NQA server. For more information about the
UDP listening service configuration, see "Configuring the NQA server."
To confi
gure a UDP echo operation:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify the UDP echo type
and enter its view.
type udp-echo N/A