HP VPN Firewall Appliances High Availability Configuration Guide

117
{ If the threshold is violated, the state of the entry is set to over-threshold. Otherwise, the state of
the entry is set to below-threshold.
If the action to be triggered is configured as trap-only for a reaction entry, when the state of the
entry changes, a trap message is generated and sent to the NMS.
Configuration prerequisites
Before you configure threshold monitoring, configure the destination address of the trap messages by
using the snmp-agent target-host command. For more information about the command, see System
Management and Maintenance Command Reference.
Configuration procedure
To configure threshold monitoring:
Ste
p
Command Remarks
1. Enter system
view.
system-view N/A
2. Create an
NQA
operation and
enter NQA
operation view.
nqa entry admin-name operation-tag
By default, no
NQA operation
is created.
3. Specify an
NQA
operation type
and enter its
view.
type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp |
udp-echo | udp-jitter | voice }
N/A