HP VPN Firewall Appliances High Availability Configuration Guide

123
Index Response Status Time
370 3 Succeeded 2011-08-23 15:00:01.2
369 3 Succeeded 2011-08-23 15:00:01.2
368 3 Succeeded 2011-08-23 15:00:01.2
367 5 Succeeded 2011-08-23 15:00:01.2
366 3 Succeeded 2011-08-23 15:00:01.2
365 3 Succeeded 2011-08-23 15:00:01.2
364 3 Succeeded 2011-08-23 15:00:01.1
363 2 Succeeded 2011-08-23 15:00:01.1
362 3 Succeeded 2011-08-23 15:00:01.1
361 2 Succeeded 2011-08-23 15:00:01.1
The output shows that the packets sent by Firewall can reach Device A through Device B. No packet loss
occurs during the operation. The minimum, maximum, and average round-trip times are 2, 5, and 3
milliseconds, respectively.
DHCP operation configuration example
Network requirements
As shown in Figure 54, configure and schedule a DHCP operation to test the time required for Firewall
to obtain an IP address from the DHCP server (Device).
Figure 54 Network diagram
Configuration procedure
# Create a DHCP operation to be performed on interface GigabitEthernet 0/1.
<Firewall> system-view
[Firewall] nqa entry admin test1
[Firewall-nqa-admin-test1] type dhcp
[Firewall-nqa-admin-test1-dhcp] operation interface gigabitethernet 0/1
# Enable the saving of history records.
[Firewall-nqa-admin-test1-dhcp] history-record enable
[Firewall-nqa-admin-test1-dhcp] quit
# Start the DHCP operation.
[Firewall] nqa schedule admin test1 start-time now lifetime forever
# Stop the DHCP operation after a period of time.
[Firewall] undo nqa schedule admin test1
# Display the results of the DHCP operation.
[Firewall] display nqa result admin test1
NQA entry (admin admin, tag test1) test results:
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 512/512/512