HP VPN Firewall Appliances High Availability Configuration Guide

134
<FirewallB> system-view
[FirewallB] nqa server enable
[FirewallB] nqa server udp-echo 10.2.2.2 8000
4. Configure Firewall A:
# Create a UDP echo operation.
<FirewallA> system-view
[FirewallA] nqa entry admin test1
[FirewallA-nqa-admin-test1] type udp-echo
# Configure 10.2.2.2 as the destination IP address and port 8000 as the destination port.
[FirewallA-nqa-admin-test1-udp-echo] destination ip 10.2.2.2
[FirewallA-nqa-admin-test1-udp-echo] destination port 8000
# Enable the saving of history records.
[FirewallA-nqa-admin-test1-udp-echo] history-record enable
[FirewallA-nqa-admin-test1-udp-echo] quit
# Start the UDP echo operation.
[FirewallA] nqa schedule admin test1 start-time now lifetime forever
# Stop the UDP echo operation after a period of time.
[FirewallA] undo nqa schedule admin test1
# Display the results of the UDP echo operation.
[FirewallA] display nqa result admin test1
NQA entry (admin admin, tag test1) test results:
Destination IP address: 10.2.2.2
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 25/25/25
Square-Sum of round trip time: 625
Last succeeded probe time: 2011-11-22 10:36:17.9
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history records of the UDP echo operation.
[FirewallA] display nqa history admin test1
NQA entry (admin admin, tag test1) history record(s):
Index Response Status Time
1 25 Succeeded 2011-11-22 10:36:17.9
The output shows that the round-trip time between Firewall A and port 8000 on Firewall B is 25
milliseconds.