HP VPN Firewall Appliances High Availability Configuration Guide

148
Figure 68 Creating a static link aggregation group
3. Enter an ID for the Layer 2 link aggregation group to be created, which identifies both the Layer 2
aggregate interface and Layer 2 aggregation group.
4. Select one or multiple ports to be assigned to the link aggregation group from the chassis front
panel.
5. Click Apply.
Displaying information about a Layer 2 aggregate interface
1. From the navigation tree, select Network > Link Aggregation.
The Summary tab is displayed by default. The list on the upper part of the page displays
information about all the aggregate interfaces.
2. Select an aggregate interface from the list to display detailed information about its member ports
on a list on the lower part.
Table 11 describes each field of a Layer 2 aggregate interfac
e.