HP VPN Firewall Appliances High Availability Configuration Guide

150
Network requirements
As shown in Figure 70, aggregate the ports on Device A and Device B to form a static link aggregation
group, enhancing link reliability.
Figure 70 Network diagram
Configuration procedure
1. Create static link aggregation group 1 on Device A:
a. From the navigation tree, select Network > Link Aggregation.
b. Click Create to enter the page as shown in Figure 71.
c. Set the link a
ggregation interface ID to 1. Select GigabitEthernet 0/1, GigabitEthernet 0/2,
and GigabitEthernet 0/3 on the chassis front panel.
d.
Click Apply.