HP VPN Firewall Appliances High Availability Configuration Guide

151
Figure 71 Creating static link aggregation group 1
2. Configure Device B in the same way Device A is configured. (Details not shown.)
Verifying the configuration
To view information about Layer 2 static aggregate interface 1 on Device A:
1. From the navigation tree, select Network > Link Aggregation.
The Summary tab appears.
2. Select aggregate interface Bridge-Aggregation1 from the list on the upper part, as shown in Figure
72.
This ag
gregate interface co
mprises three Selected ports: GigabitEthernet 0/1, GigabitEthernet
0/2, and GigabitEthernet 0/3.