HP VPN Firewall Appliances High Availability Configuration Guide

161
Configuring group-specific load sharing criteria
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter aggregate interface
view.
• Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
• Enter Layer 3 aggregate interface
view:
interface route-aggregation
interface-number
Use either command.
3. Configure the load sharing
criteria for the aggregation
group.
link-aggregation load-sharing mode
{ { destination-ip | destination-port |
ip-protocol | source-ip | source-port } *
| per-packet }
By default, the device performs
load sharing based on the
five-tuple (source IP address,
destination IP address, source
port, destination port, and
protocol).
Support for the per-packet
keyword depends on the device
model. For more information, see
this command in High
Availability Command
Reference.
Displaying and maintaining Ethernet link aggregation
Task Command Remarks
Display information about
aggregate interfaces.
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display the local system ID.
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the global or
group-specific link-aggregation
load sharing criteria.
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display detailed link aggregation
information for link aggregation
member ports.
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display summary information
about all aggregation groups.
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display detailed information about
a specific or all aggregation
groups.
display link-aggregation verbose
[ { bridge-aggregation | route-aggregation }
[ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.