HP VPN Firewall Appliances High Availability Configuration Guide

181
# When the data traffic on the active interface GigabitEthernet 0/1 exceeds 8000 kbps (that is,
10000 kbps × 80%), standby interface GigabitEthernet 0/2 with a higher priority is enabled first.
Then you can view the state of the active and standby interfaces.
[FirewallA-GigabitEthernet0/1] display standby state
Interface Interfacestate Standbystate Standbyflag Pri Loadstate
GigabitEthernet0/1 UP MUP MUD
GigabitEthernet0/2 UP UP BU 30
GigabitEthernet0/3 STANDBY STANDBY BU 20
Backup-flag meaning:
M---MAIN B---BACKUP V---MOVED U---USED
D---LOAD P---PULLED