HP VPN Firewall Appliances High Availability Configuration Guide

193
• UDPNORMAL—Monitors the availability of an application port by sending UDP packets.
UDPNORMAL health monitoring does not require server response, so HP recommends that you use
it together with the ICMP health monitoring type. The reachability of the server is determined
through ICMP detection.
To configure a health monitoring method:
1. Select High Reliability > Load Balance > Health Monitor from the navigation tree.
The heath monitoring page appears.
Figure 97 Health monitoring
2. Click Add.
The page for adding a health monitoring method appears.
Figure 98 Adding a health monitoring method