HP VPN Firewall Appliances High Availability Configuration Guide

209
Ste
p
Remarks
5. Creating a logical link group
Required.
IMPORTANT:
The maximum number of real
service groups, real services, and
virtual services depends on the
resource configuration of the root
virtual device. For more
information, see "Managing
VDs."
6. Creating a logical link
Required.
7. Creating a virtual service
Required.
8. Displaying link load balancing
statistics
Optional.
9. Stopping service or enabling
slow-offline
Optional.
10. Stopping scheduling for a
logical link
Optional.
Configuring inbound link load balancing
Ste
p
Remarks
1. Configuring a health monitoring
method
Optional.
2. Creating a physical link
Required.
3. Configuring the best performing
link function
Optional.
Configure dynamic best performing link parameters and static best
performing link entries.
4. Configuring DNS redirection and
DNS TTL
Required.
Inbound link load balancing takes effect only after DNS redirection is
enabled.
5. Configuring a DNS entry
Required.
To implement inbound link load balancing, configure a DNS A
record. To implement Simple Mail Transfer Protocol (SMTP) inbound
link load balancing, you must additionally configure a DNS MX
record.
Configuring public parameters
1. Select High Reliability > Load Balance > Public Setting from the navigation tree.
The public parameter configuration page appears.
Figure 109 Public parameter configuration