HP VPN Firewall Appliances High Availability Configuration Guide

211
2. Click Add.
The page for adding a health monitoring method appears.
Figure 111 Adding a health monitoring method
3. Configure the parameters as described in Table 18.
4. Click Apply.
Table 18 Configuration items
Item Descri
p
tion
Health Monitoring Health monitoring type.
Check Interval Interval at which health monitoring is performed.
Timeout Timeout for a health monitoring operation.
Retry Times
When the number of retry times is n, if health monitoring is performed for n times and
the corresponding server or port is unavailable, the health monitoring is considered
failed.
Destination IP
Destination IP address for health monitoring.
If this parameter is not specified, the next hop IP address of the physical link is adopted.
Destination Port
Destination port number for health monitoring.
This parameter is not supported by ICMP health monitoring.
Configuring the health monitoring method for the best performing link function
1. Select High Reliability > Load Balance > Health Monitor from the navigation tree.
The heath monitoring page appears.
2. Click the icon corresponding to the proxim_dns, proxim_icmp, or proxim_tcp_half_open
health monitoring method.
The page for modifying health monitoring parameters appears.