HP VPN Firewall Appliances High Availability Configuration Guide

15
Figure 11 Modifying the VRRP group configuration
6. Configure the parameters as described in Table 5.
7. Click Apply.
Table 5 Configuration items
Item Descri
p
tion
Track
Object
Object
Configure the track object function by adding the Track object to be monitored and
the processing method:
• Object—Specify the serial number of the Track object to be monitored. You can
specify an uncreated object.
• Reduced Priority—If the status of the monitored Track object changes to
negative, the priority of the router decreases by a specified value.
• Switchover—If the status of the monitored Track object changes to negative, the
router immediately switches to the master.
IMPORTANT:
• The configuration takes effect only when the router is not the IP address owner.
• When the status of the monitored Track object turns from negative to positive, the
corresponding router automatically restores its priority.
• In the list box of added Track object, the Priority/Switchover column displays a
value or the letter S, where the value represents the decreased value of the router
priority, and S represents the switchover mode.
Reduced
Priority
Switchover