HP VPN Firewall Appliances High Availability Configuration Guide

216
Item Descri
p
tion
Uplink Bandwidth Weight Uplink bandwidth weight in the dynamic best performing link algorithm.
Downlink Bandwidth
Weight
Downlink bandwidth weight in the dynamic best performing link algorithm.
Link Cost Weight Link cost weight in the dynamic best performing link algorithm.
Detection Interval The interval at which best-performing link detection is performed.
Timeout Timeout for a best-performing link detection operation.
Inbound Method
Specify a health monitoring method (proxim_dns, proxim_icmp, or
proxim_tcp_half_open) for inbound link load balancing to obtain the best
performing link parameters (network delay and router hops).
Outbound Method
Specify a health monitoring method (proxim_icmp or proxim_tcp_half_open) for
outbound link load balancing to obtain the best performing link parameters
(network delay and router hops).
Configuring a static best performing link entry
1. Select High Reliability > Load Balance > Link Load Balance > Best-Performing Link from the
navigation tree.
2. Click the Best Performing Link Table tab.
The best performing link table displays all the dynamic and static best performing link entries.
Figure 116 Best performing link table
3. Click Add.
The page for creating a static best performing link entry appears.
Figure 117 Creating a static best performing link entry
4. Configure the parameters as described in Table 22.
5. Click Apply.