HP VPN Firewall Appliances High Availability Configuration Guide

229
Figure 131 Network diagram
Configuring the LB device
Assume that the IP addresses of the interfaces on the LB device and the zone to which they belong have
been configured. The following describes the configurations of load balancing in detail.
1. Create real service group HTTPGroup:
a. Select High Reliability > Load Balance > Server Load Balance from the navigation tree.
The Real Service Group tab appears.
b. Click Add.
The Add Real Service Group page appears.
c. Enter the real service group name HTTPGroup, and select the algorithm Weighted Round Robin,
heath monitoring method icmp, and troubleshooting method Keep Connection.
d. Click Apply.
Figure 132 Creating a real service group