HP VPN Firewall Appliances High Availability Configuration Guide

231
e. Select the mask 32 (255.255.255.255) and protocol type TCP.
f. Enter the port number 80.
g. Select the forwarding mode NAT, real service group HTTPGroup, and the Enable Virtual
Service option.
h. Click Apply.
Figure 134 Creating virtual service VS
Verifying the configuration
After the server runs correctly for a period of time, you can display the statistics to verify the configuration
of load balancing.
1. Select High Reliability > Load Balance > Server Load Balance from the navigation tree.
2. Click the Statistics tab.
3. Click the virtual service name link of virtual service VS.
You can see the statistics on the page.