HP VPN Firewall Appliances High Availability Configuration Guide

235
Figure 139 Creating virtual service VS
Configuring LB device B
Assume that the IP addresses of the interfaces on LB device B and the zones to which they belong have
been configured.
1. Select High Reliability > Load Balance > Public Setting from the navigation tree.
The public parameter configuration page appears.
2. Select Keep Last-hop Information.
3. Click Apply.
Figure 140 Saving the last hop information
Verifying the configuration
A period of time after the hosts in the internal network access the Interface, you can display the statistics
on LB device A to verify load balancing configuration.
To view the traffic from Network A to Network B on LB device A:
1. Select High Reliability > Load Balance > Server Load Balance from the navigation tree.
2. Click the Statistics tab.
3. Click the virtual service name link of virtual service VS.