HP VPN Firewall Appliances High Availability Configuration Guide

237
Figure 142 Network diagram
Configuring the LB device
Assume ISP1 and ISP2 have been deployed successfully and their status is healthy, and other features
such as the IP addresses of the interfaces, the zone to which the interfaces belong, and routing of the LB
device have been configured. The following describes the configuration of outbound link load balancing.
1. Create ACL 3000, allowing packets with the destination 10.66.3.0/24:
a. Select Firewall > ACL from the navigation tree.
b. Click Add.
c. Enter the ACL number 3000, and select Config from the Match Order list.
d. Click Apply.
Figure 143 Creating ACL 3000
e. Click the icon of ACL 3000, and then click Add.
f. Select Permit from the Operation list, select the Destination IP Address option, and enter the
destination IP address 10.66.3.0 and destination wildcard 0.0.0.255.
g. Click Apply.