HP VPN Firewall Appliances High Availability Configuration Guide

240
c. Click Apply.
7. Configure virtual service vs:
a. Click the Virtual Service tab
b. Select Match IP, and then click Add.
c. Enter the virtual service vs and virtual service address 0.0.0.0.
d. Select the mask 0 (0.0.0.0) and protocol type Any, and enter the port number 0.
e. Select the logical link group LogicalLinkGrp.
f. Select the Enable Policy and Enable Best-Performing Link options.
g. Click Apply.
Figure 148 Creating virtual service vs
Verifying the configuration
The internal users send packets with the destination in the 100.2.2.0/24 segment to the external
network.
1. Select High Reliability > Load Balance > Link Load Balance > Best-Performing Link from the
navigation tree.
2. Click the Best Performing Link Table tab.
You can view the dynamic best performing link entries in the best performance link table.
Figure 149 Best performance link table
3. After the system runs for a period of time, select High Reliability > Load Balance > Link Load
Balance > Outbound from the navigation tree, and then click the Statistics tab.