HP VPN Firewall Appliances High Availability Configuration Guide

26
Figure 13 Creating VRRP group 1
3. Configure VRRP group attributes:
a. On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP
group 1.
b. Enter 110 in the Priority field.
c. Select Preemptive from the Preempt Mode field.
d. Enter 5 in the Delay field.
e. Select Simple from the Authentication field.
f. Enter hello in the Key field.
g. Enter 5 in the Advertise Time field.
h. Click Display Track Config.
i. Select GigabitEthernet0/2 from the Interface field, enter 30 in the Reduced Priority field, and
then click Add to add the interface to the list box of tracked interface.
j. Click Apply.
Figure 14 Configuring VRRP group attributes