HP VPN Firewall Appliances High Availability Configuration Guide

27
Configuring Firewall B
1. Configure the IP address of each interface and the zones. (Details not shown)
2. Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:
a. Select High Availability > VRRP from the navigation tree.
b. Click the icon corresponding to GigabitEthernet 0/1.
The VRRP group page appears.
c. Click Add.
The page for creating a VRRP group appears.
d. Enter 1 in the VRID field and 202.38.160.111 in the Virtual IP field, and click Add to add the
virtual IP address to the Virtual IP Members field.
e. Click Apply.
Figure 15 Creating VRRP group 1
3. Configure VRRP group attributes:
a. On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP
group 1.
b. Select Preemptive from the Preempt Mode field.
c. Enter 5 in the Delay field.
d. Select Simple from the Authentication field.
e. Enter hello in the Key field.
f. Enter 5 in the Advertise Time field.
g. Click Apply.