HP VPN Firewall Appliances High Availability Configuration Guide

36
c. Click Apply.
Figure 21 Creating VRRP group 2
4. Set the priority of Firewall A in VRRP group 1 to 110:
a. On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP
group 1.
b. Enter 110 in the Priority field.
c. Click Apply.
Figure 22 Setting the priority of Firewall A in VRRP group 1
Configuring Firewall B
Configure Firewall B in the same way Firewall A is configured. The figures are omitted.
1. Configure the IP address of each interface and the zones. (Details not shown.)
2. Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:
a. Select High Availability > VRRP from the navigation tree.
b. Click the icon corresponding to GigabitEthernet 0/1.
The VRRP group page appears.
c. Click Add.
The page for creating a VRRP group appears.