HP VPN Firewall Appliances High Availability Configuration Guide

54
Configuring stateful failover in the Web interface
Configuring stateful failover
1. Select High Reliability > Stateful Failover from the navigation tree.
The stateful failover configuration page appears. The upper part of the page allows you to
configure stateful failover parameters, and the lower part of the page displays the current stateful
failover state and the configuration synchronization state.
Figure 30 Stateful failover configuration page
2. Configure the parameters as described in Table 6.
3. Click Apply.
Table 6 Configuration items
Item Descri
p
tion
Enable Stateful Failover
Enable/disable the stateful failover feature.
IMPORTANT:
The configuration items are available only after you select the Enable Stateful
Failover box.
Session Failover
Enable/disable the session failover function.
IMPORTANT:
To enable stateful failover for NAT, ALG, and ASPF services, you must enable
session failover.
IPSec Failover
Enable/disable the IPsec failover function.
IMPORTANT:
To enable stateful failover for IPsec services, you must enable IPsec failover.