HP VPN Firewall Appliances NAT and ALG Command Reference

6
Next-hop: 100.100.100.1
Status: Active
Interface:GigabitEthernet0/2
Direction: outbound ACL: 3000 Address-group: 300 NO-PAT: N
VPN-instance: vpn2
Out-interface: Vlan-interface200
Next-hop: 100.100.110.1
Status: Inactive
Interface:GigabitEthernet0/3
Direction: outbound ACL: 2001 Address-group: --- NO-PAT: N
VPN-instance: ---
Table 3 Command output
Field Descri
p
tion
NAT bound information: Display configured NAT address translation information.
Interface Interface associated with a NAT address pool.
Direction Address translation direction: outbound.
ACL ACL number.
Address-group Address group number. The field is displayed as null in Easy IP mode.
NO-PAT Identifies whether NO-PAT mode is supported.
VPN-instance
VPN where the NAT address pool belongs. The field is displayed as "---" if
it is not configured.
Related commands
nat outbound
display nat dns-map
Use display nat dns-map to display NAT DNS mapping configuration information.
Syntax
display nat dns-map [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.