HP VPN Firewall Appliances NAT and ALG Command Reference

23
NAT-PT commands
NAT-PT is not supported on VLAN interfaces and does not support VPN instances, IPv4 fragments, or
ICMPv6 fragments.
display natpt address-group
Use display natpt address-group to display NAT-PT address pool configuration information.
Syntax
display natpt address-group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the NAT-PT address pool configuration information.
<Sysname> display natpt address-group
NATPT IPv4 Address Pool Information:
1 : from 1.1.1.1 to 1.1.1.4
Table 8 Command output
Field Descri
p
tion
1 Address pool number.
from 1.1.1.1 Start IP address in an address pool.
to 1.1.1.4 End IP address in an address pool.
display natpt address-mapping
Use display natpt address-mapping to display static and dynamic NAT-PT address mappings.
Syntax
display natpt address-mapping [ | { begin | exclude | include } regular-expression ]