Manualshelf

HP VPN Firewall Appliances NAT and ALG Command Reference

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
41424344454647484950
38
Examples
# Configure a static IP port block for users from 192.168.1.1 to 192.168.1.10.
<Sysname> system-view
[Sysname] nat444 static local 192.168.1.1 192.168.1.10 global 202.1.1.1 202.1.1.2
port-range 10001 20000 block-size 2000
Related commands
nat444 outbound static
nat444 log session-end
Use nat444 log session-end to enable NAT444 session removal logging.
Use undo nat444 log session-end to restore the default.
Syntax
nat444 log session-end
undo nat444 log session-end
Default
NAT444 session removal logging is disabled.
Views
System view
Examples
# Enable NAT444 session removal logging.
<Sysname> system-view
[Sysname] nat444 log session-end
nat444 log session-start
Use nat444 log session-start to enable NAT444 session establishment logging.
Use undo nat444 log session-start to restore the default.
Syntax
nat444 log session-start
undo Nat444 log session-start
Default
NAT444 session establishment logging is disabled.
Views
System view
Examples
# Enable NAT session establishment logging.
<Sysname> system-view
[Sysname] nat444 log session-start