HP VPN Firewall Appliances NAT and ALG Command Reference

39
nat444 log user
Use nat444 log user to enable NAT444 user logging.
Use undo nat444 log user to disable NAT444 user logging.
Syntax
nat444 log user
undo nat444 log user
Default
NAT444 user logging is disabled.
Views
System view
Examples
# Enable NAT444 user logging.
<Sysname> system-view
[Sysname] nat444 log user
nat mapping-behavior
Use nat mapping-behavior to configure the mapping behavior mode for NAT444.
Use undo nat mapping-behavior to restore the default.
Syntax
nat mapping-behavior endpoint-independent [ acl acl-number ]
undo nat mapping-behavior endpoint-independent [ acl acl-number ]
Default
NAT444 mapping behavior mode is Address and Port Dependent Mapping.
Views
System view
Default command level
2: System level
Parameter
endpoint-independent: Specifies the endpoint-independent mapping behavior mode. In this mode, the
peer IP address and peer port are not considered in address translation.
acl acl-number: Specifies the ACL for matching a specific NAT mapping behavior mode. The acl-number
argument represents the ACL number in the range of 2000 to 3999.
Usage guidelines
For packets with the same source address and port number, the same NAT444 mapping applies so that
the source IP address and port number are mapped to the same external address and port number,
regardless of the destination addresses of the packets. The NAT444 gateway also allows external hosts