HP VPN Firewall Appliances NAT and ALG Command Reference

2
Syntax
display nat address-group [ group-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-number: Specifies the NAT address group number. If this argument is not provided, this command
displays information about all NAT address pools.
The following matrix shows the value range for the group-number argument on different firewalls and
firewall modules:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 0 to 255
F1000-E 0 to 2047
F5000 0 to 2047
F5000-S/F5000-C 0 to 2047
VPN firewall modules 0 to 2047
20-Gbps VPN firewall modules 0 to 2047
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 2 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
2 : from 202.110.10.20 to 202.110.10.25
# Display information about NAT address group 1.
<Sysname> display nat address-group 1
NAT address-group information:
1 : from 202.110.10.10 to 202.110.10.15