HP VPN Firewall Appliances NAT and ALG Command Reference

3
Table 1 Command output
Field Descri
p
tion
1 : from 202.110.10.10 to 202.110.10.15
The range of IP addresses in address pool 1 is from
202.110.10.10 to 202.110.10.15.
Related commands
nat address-group
display nat all
Use display nat all to display all NAT configuration information.
Syntax
display nat all [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all NAT configuration information.
<Sysname> display nat all
NAT address-group information:
There are currently 1 nat address-group(s)
1 : from 202.110.10.10 to 202.110.10.15
NAT bound information:
There are currently 1 nat bound rule(s)
Interface: GigabitEthernet0/1
Direction: outbound ACL: 2009 Address-group: 1 NO-PAT: N
NAT server in private network information:
There are currently 1 internal server(s)
Interface: GigabitEthernet0/2, Protocol: 6(tcp)
Global: 5.5.5.5 : 80(www)
Local : 192.1.1.1 : 80(www)