HP VPN Firewall Appliances NAT and ALG Configuration Guide

10
Figure 8 Static NAT configuration page
2. In the Static Address Mapping area where static address mappings are displayed, click Add to
enter the Add Static Address Mapping page.
Figure 9 Adding Static Address Mapping page
3. Configure a static address mapping as described in Table 3.
4. Click Apply.
Table 3 Configuration items
Item Descri
p
tion
Internal VPN Instance
Specify a name of the VPN instance to which the internal IP addresses belong.
If no internal VPN instance is specified, this indicates that the internal address is
a common private network address.
Internal IP Address Enter an internal IP address for the static address mapping.