HP VPN Firewall Appliances NAT and ALG Configuration Guide

21
f. Enter 10.110.10.3 in the Internal IP field.
g. Select the service type ftp.
h. Click Apply.
Figure 23 Configuring an internal FTP server
2. Configure the Web server 1:
a. Click Add in the Internal Server area.
b. On the page that appears, select GigabitEthernet0/1 for Interface.
c. Select the Assign IP Address option, and enter 202.38.1.1.
d. Select the first option for Global Port and enter 80.
e. Enter 10.110.10.1 in the Internal IP field.
f. Select the service type www.
g. Click Apply.