HP VPN Firewall Appliances NAT and ALG Configuration Guide

65
Figure 51 Network diagram
Configuration procedure
This section describes ALG configuration only, assuming that other required configurations on the server
and client have been done.
1. Enable ALG for NBT:
a. Select Firewall > ALG from the navigation tree.
b. Add nbt to the Selected Application Protocols list.
c. Click Apply.
Figure 52 Enabling ALG for NBT
2. Configure static NAT:
a. Select Firewall > NAT > Static NAT from the navigation tree.
b. In the Static Address Mapping area, click Add.
c. Enter 192.168.1.3 as the internal IP address.
d. Enter 5.5.5.9 as the global IP address.
e. Click Apply.