HP VPN Firewall Appliances Network Management Command Reference

985
Examples
# Display information about all IPv6 PIM neighbors.
<Sysname> display pim ipv6 neighbor
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires Dr-Priority Mode
FE80::A01:101:1 GE0/1 02:50:49 00:01:31 1 B
FE80::A01:102:1 GE0/2 02:49:39 00:01:42 1 B
# Display the detailed information of the IPv6 PIM neighbor whose IPv6 address is FE80::A01:101:1.
<Sysname> display pim ipv6 neighbor fe80::a01:101:1 verbose
Neighbor: FE80::A01:101:1
Interface: GigabitEthernet0/3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Neighbor Secondary Address(es):
1::1
Table 230 Command output
Field Descri
p
tion
Total Number of Neighbors Total number of IPv6 PIM neighbors.
Neighbor Primary IPv6 address of the PIM neighbor (link-local address).
Interface Interface connecting the IPv6 PIM neighbor.
Uptime Length of time since the IPv6 PIM neighbor was discovered.
Expires/Expiry time
Remaining time of the IPv6 PIM neighbor, where "never" means that
the IPv6 PIM neighbor is always up and reachable.
Dr-Priority/DR Priority Priority of the IPv6 PIM neighbor.
Mode Mode of the IPv6 PIM neighbor.
Generation ID
Generation ID of the IPv6 PIM neighbor. (A random value indicating
status change of the IPv6 PIM neighbor.)
Holdtime
Holdtime of the IPv6 PIM neighbor, where "forever" means that the
IPv6 PIM neighbor is always up and reachable.
LAN delay Prune message delay.
Override interval Prune override interval.
State refresh interval
Interval for sending state refresh messages.
Displayed only when the IPv6 PIM neighbor operates in IPv6
PIM-DM mode and state refresh capability is enabled.
Neighbor tracking Whether neighbor tracking is enabled.