HP VPN Firewall Appliances Network Management Command Reference

986
Field Descri
p
tion
Neighbor Secondary Address(es)
Secondary IPv6 address of the PIM neighbor (non-link-local
address).
display pim ipv6 routing-table
Use display pim ipv6 routing-table to display IPv6 PIM routing table information.
Syntax
display pim ipv6 routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | incoming-interface [ interface-type interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register } | mode mode-type | flags
flag-value | fsm ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where
x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the prefix length of the IPv6 multicast group/source address prefix. For an IPv6
multicast group address, the effective range is 8 to 128 and the default value is 128. For an IPv6 multicast
source address, the effective range is 0 to 128 and the default value is 128.
incoming-interface: Specifies an incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Specifies an outgoing interface.
include: Specifies an interface in the outgoing interface list.
exclude: Specifies an interface not in the outgoing interface list.
match: Specifies an interface that only exists in the outgoing interface list.
mode mode-type: Specifies an IPv6 PIM mode, where mode-type can have the following values:
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
flags flag-value: Specifies a flag. The values of flag-value and their meanings are as follows:
• act: Specifies IPv6 multicast routing entries that have been used for routing data.
• del: Specifies IPv6 multicast routing entries scheduled to be deleted.
• exprune: Specifies multicast routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.