HP VPN Firewall Appliances Network Management Command Reference

990
<Sysname> display pim ipv6 rp-info ff0e::101
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64 [B]
RP: 2004::2
Priority: 192
HoldTime: 130
Uptime: 00:05:19
Expires: 00:02:11
Table 232 Command output
Field Descri
p
tion
prefix/prefix length IPv6 multicast group served by the RP.
RP IPv6 address of the RP.
Priority RP priority.
HoldTime Timeout time of the RP.
Uptime Length of time since the RP was elected.
Expires Remaining time of the RP.
embedded-rp
Use embedded-rp to enable embedded RP.
Use undo embedded-rp to disable embedded RP or restore the default.
Syntax
embedded-rp [ acl6-number ]
undo embedded-rp [ acl6-number ]
Default
Embedded RP is enabled for IPv6 multicast groups in the default embedded RP address scopes.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
acl6-number: Specifies a basic IPv6 ACL number, in the range of 2000 to 2999.
Usage guidelines
The default embedded RP address scopes are FF7x::/12 and FFFx::/12. Here "x" refers to any legal
address scope. For more information about the scope field, see Network Management Configuration
Guide.
When you use the embedded-rp command without specifying acl6-number, the embedded RP feature is
enabled for all the IPv6 multicast groups in the default embedded RP address scopes. If you specify
acl6-number, the embedded RP feature is enabled for only those IPv6 multicast groups that are within the
default embedded RP address scopes and pass the ACL check.