HP VPN Firewall Appliances Network Management Command Reference

992
Syntax
hello-option holdtime interval
undo hello-option holdtime
Default
The IPv6 PIM neighbor timeout timer is 105 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies an IPv6 PIM neighbor timeout timer in seconds. The value ranges from 1 to 65535. A
value of 65535 makes the IPv6 PIM neighbor always reachable.
Examples
# Set the IPv6 PIM neighbor timeout timer to 120 seconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option holdtime 120
Related commands
pim ipv6 hello-option holdtime
hello-option lan-delay (IPv6 PIM view)
Use hello-option lan-delay to configure the global value of the LAN-delay time (namely, the period of
time that the device waits before it forwards a received prune message).
Use undo hello-option lan-delay to restore the default.
Syntax
hello-option lan-delay interval
undo hello-option lan-delay
Default
The LAN-delay time is 500 milliseconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a LAN-delay time in milliseconds. The value ranges from 1 to 32767.
Examples
# Set the LAN-delay to 200 milliseconds globally.
<Sysname> system-view